CAN FIX with 5'' display

Discussion forum for the CAN-FIX protocol. This is a CANBus based communications protocol specifically suited for experimental aviation.

Moderators: John Nicol, birkelbach

Post Reply
quentin96
Posts: 2
Joined: 22 Jun 2021, 08:47

CAN FIX with 5'' display

Post by quentin96 »

Is there a tutorial somewhere to setup CAN on a raspi with the makerplane 5'' display?
User avatar
John Nicol
Posts: 611
Joined: 23 Nov 2011, 12:17
Contact:

Re: CAN FIX with 5'' display

Post by John Nicol »

Hi,

Not at the moment. Something we need to get on to at some stage.

John
-----
John Nicol
Founder, MakerPlane
birkelbach
Posts: 193
Joined: 04 Sep 2012, 14:42

Re: CAN FIX with 5'' display

Post by birkelbach »

I am going to be getting mine hooked up and going pretty quick so I might be able to help. I’ve had it working before but it’s been a few years, I don’t remember exactly how to do it. There’s some boot config stuff to set for the CAN controller and then getting the latest versions of the software loaded.
Phil Birkelbach
Waller, Texas
RV-7 727WB
www.myrv7.com
Post Reply