Version 0.4 Release

Discussion forum for the CAN-FIX protocol. This is a CANBus based communications protocol specifically suited for experimental aviation.

Moderators: John Nicol, birkelbach

Post Reply
birkelbach
Posts: 193
Joined: 04 Sep 2012, 14:42

Version 0.4 Release

Post by birkelbach »

Okay so we've released version 0.4 of the CAN-FIX protocol specification. It can be found here... https://sourceforge.net/projects/fix-project/

I called version 0.3 a release candidate and that was obviously premature. I got some really great comments from John, and as we sorted through most of that we had other changes to make. This version is not a release candidate. There were enough changes that some data types were not filled in and I'm sure that I've introduced more typos and spelling errors. There will be at least one more revision between here and final release.

The notable changes since 0.3 are...
  • Moved discrete pilot input controls higher in the priority list.
  • Added parameters for Hybrid/Electric propulsion data.
  • Added parameters for ADS-B Traffic.
  • Changed all the altitudes to Double Integers and removed the -1,000 ft offset.
  • Changed all the altitudes to 1 ft resolution instead of 10 ft.
  • Added an appendix with suggested device type codes.
  • Added a section on the Revision process.
  • Clarifications on Node Alarms and Node Specific Messages.
  • Lot's of typos and misspellings fixed.
  • Other minor clarifications.
I've attached a PDF file that shows the changes from version 0.3. Keep in mind that the parameter tables are dynamically generated so those changes don't show up very well in this document.
Attachments
CAN-FIX-0.4.Changes.pdf
(742.77 KiB) Downloaded 932 times
Phil Birkelbach
Waller, Texas
RV-7 727WB
www.myrv7.com
birkelbach
Posts: 193
Joined: 04 Sep 2012, 14:42

Re: Version 0.4 Release

Post by birkelbach »

There are some very specific issues that we need to resolve on this spec before I'd feel comfortable releasing it as a 1.0 - Ready for production release.

There are several parameters that still don't have data types and/or ranges assigned. Most of these are associated with ADS-B. I simply don't know enough about ADS-B to know what information all this represents. I took some guesses with some of it, but if you know something about ADS-B traffic information, please take a look and let us know what the best way to represent this information would be.

Let me know if the spec is not easy to understand. If someone with a rudimentary knowledge of computer communications can't fully understand something in this spec then I have failed. The node specific messages seem to be a bit tricky.

Is there any more Hybrid / Electric Propulsion information that you think we should add? This is a new area and could use more thought than I have given it.

Is there any other flight information that you think we should add?

We need a logo or some kind of graphic. Any ideas?
Phil Birkelbach
Waller, Texas
RV-7 727WB
www.myrv7.com
User avatar
John Nicol
Posts: 611
Joined: 23 Nov 2011, 12:17
Contact:

Re: Version 0.4 Release

Post by John Nicol »

Great job! I will have a look at this new version and post comments in the next day or so once I have had a chance to digest....

John
-----
John Nicol
Founder, MakerPlane
birkelbach
Posts: 193
Joined: 04 Sep 2012, 14:42

Re: Version 0.4 Release

Post by birkelbach »

Now that the Arduino library is out, I'd like to get another revision of the specification out. I haven't made many changes to the spec itself but I've moved some of the parameters around. A couple of little details came up while I was building the library too and I made those changes. If there are no other comments I'll try to get it out in public in the next few days.
Phil Birkelbach
Waller, Texas
RV-7 727WB
www.myrv7.com
Post Reply