Laser Cut Hobby Center

Information and discussion on CNC equipment, processes, design etc.

Moderator: John Nicol

Post Reply
User avatar
John Nicol
Posts: 596
Joined: 23 Nov 2011, 12:17
Contact:

Laser Cut Hobby Center

Post by John Nicol »

Hi Everyone,

I have had some time to build out a hobby table at home and needed a small cabinet to hold pencils and other art supplies. There is an excellent resource online here: https://www.bkmakes.com/the-ultimate-hobby-station

I modified one of the cabinets to create a new one and have I have attached the dxf files for anyone to use if they want. I put some holes in the back to let the air in and out. The tolerances are so tight that it can create a suction if you try to pull out the draws too quick! He has put a lot of time and effort into the original design so please subscribe to his YouTube channel and check out the other resources on his site!

Cheers
John
20230813_171408.jpg
20230813_171441.jpg
20230813_171821.jpg
20230813_171532.jpg
20230813_171509.jpg
20230813_172020.jpg
Attachments
PencilCabinet_Top_and_Bottom.dxf
(1.75 KiB) Downloaded 41 times
PencilCabinet_Small_Drawer.dxf
(33.57 KiB) Downloaded 48 times
PencilCabinet_Sides_and_Back.dxf
(12.42 KiB) Downloaded 57 times
PencilCabinet_Middle_Shelf.dxf
(979 Bytes) Downloaded 49 times
PencilCabinet_Large_Drawer.dxf
(16.21 KiB) Downloaded 56 times
-----
John Nicol
Founder, MakerPlane
Post Reply